![](https://lemmy.world/pictrs/image/41a1acdf-075f-4621-89aa-bbba58099988.jpeg)
![](https://lemmy.world/pictrs/image/8286e071-7449-4413-a084-1eb5242e2cf4.png)
I second this, when a drive shits the bed a sata controller handles it better, some times with a USB adapter you mess the whole bus up and need a reboot of the machine (from using them on windows experience)
I second this, when a drive shits the bed a sata controller handles it better, some times with a USB adapter you mess the whole bus up and need a reboot of the machine (from using them on windows experience)
Wait that’s still the mpg in the us ? That’s the same gallon we use in the uk ? (As I learnt the a us gallon can be different when talking about whisky or some thing along those lines…)
Not sure on your location as from the picture it doesn’t look like you’re in the USA. However some places have restrictions on gathering water from your roof due to the materials used to clad the roof being poisonous. I would just double check that as I wouldn’t want to consume any fruits or vegetables that have been grown in water that wasn’t safe. I would also use a water butt or gatherer rather (totally covered from sun light) than hosing directly into a plant bed as if it’s raining. The plants will already be getting watered from the rainwater so you want to store the rainwater for use later.
Can’t remember how long ago I bought it, but it was either beta or pretty alpha at the time
I suspect it completes almost instantly if you agree to it tho ?
I’m sure there is a better way, but I seem to remember there was a watch folder integration that you could use to watch the TTS folder and then play that new file on a speaker. Not sure how you could then play it on the correct speaker, and I’m sure someone else has a much better real solution than this
Dave Or Davette
So I don’t think HASS really names them, I think they have a default/preset name on themselves, like “TZ3000_2”
Before areas was a thing in HASS I would name things with an area name. ESP32-5-Bedroom. Now I just leave it what ever it defaults to, then use HASS to name them, and then put them in an area.
Should be fine, I’m writing to spinning rust, so if I was playing back a movie it could cause a few “dad the tv is buffering again” problems
With arr services try to limit network throughput and disk throughput on them, as if either are maxed out for too long (like moving big linux iso files) it can cause weird timeouts and failures
Another one to have a search for is IPFS.
It always throws me when I see at 1080 movie less than 5gb, then I scroll across and see it’s x265…
Web hosting is free, but the extras are non-optional and cost money LOL
Wait is this the same whisper Home assistant and rasphy use ?
Both devices need the same subnet mask, otherwise only one can see the “extra addresses” but in my opnsense I think I and to add some firewall router between LAN & WG0
So the subnet mask is got from the device handing out dhcp. Not 100% sure but on my android the subnet mash for wireguard is as /24 set on the device and also matching in the wireguard settings in opnsense. Opnsense is very very powerful, I would watch a few videos on YouTube about subneting, wireguard routing & dhcp. Its gonna be quite the learning curve (or could be)
As to why everything has stopped working who knows…
My friendly 2 pence, my mobile provider me a 10.x.x.x IP with CNAT (carrier grade NAT) when I’m on mobile data.
Could you not set your subnet mask on the wireguard and home to 255.255.0.0 then you can see the whole 10.0.x.x block in a broadcast?
Looks like a cpu/gpu type power connector. Even if its a standard plug does not mean its a standard pin out ! Craft computing on YouTube had what looked like a standard plug in his server but it had a 12volt and ground switched, so would have caused some real damage